301 /1.4301 Cold Rolled Stainless Steel Strips For Flexible Hoses
Introduction:
Strip steels are manufactured by hot rolling to thicknesses not less than 2 mm, and then finally cold rolled to the required final thickness. Since cold forming (e.g. by deep drawing, stretch forming or bending) is a widely used application for low-carbon strip steels, a final recrystallization anneal is applied.
Cold rolled stainless steel strip is made of hot rolled stainless steel strip as blank and further cold rolled. Compared with the hot rolled strip, it has higher dimensional accuracy, lower surface roughness, better surface quality, smooth, and higher strength. Therefore, the thinner cold-rolled strip can replace the thicker hot-rolled strip for the same purpose to save the amount of steel, which is of great economic significance.
Description
| Item | Stainless steel strip |
| Grade | 201, 304, 304L, 316L, 316Ti, 321, 430, etc |
| Standard | ASTM,JIS,DIN,GB |
| Thickness | 0.02- 3mm |
| Width | 3mm - 1500mm |
| Surface | 2B, BA |
| Coil weight | customized |
| Inner diameter | 300mm/400mm/500mm |
| Edge finish | Slit/Mill edge |
| Burr | Min 10% of the thickness. |
| Application | electronic components, etching, cylinder gaskets, gaskets, power optical cables, medical capillary tubes, high-grade metal hoses, products, Electric heating tubes, industrial tubes and other products |
| Lead time | 15-20 days after the prepayment. |
| Payment terms | 30%TT for deposit, balance payment before shipment or LC at sight. |
| Place of Origin | China |
| MOQ | 3 tons |
| Supply ability | 3700 tons per month. |
Applications:
It is suitable for electrical appliances, stainless steel kitchenware, hardware products, ground springs, sanitary ware, chemical industry, petroleum, pipe making, cable wrapping, medical treatment, bending and flanging, mechanical equipment manufacturing, construction decoration and other industries. Hard state is suitable for electronics, electrical appliances, computers, high-tech product parts, adjusting gaskets, metal stamping parts spring shrapnel and other stainless steel industries.
Manufacturing Processes:
- Raw material
- Cold rolling
- Degreasing
- Bright annealing
- Tension levelling
- Slitting
- Packing
- Checking
Packaging:
Product Tags:
|
|
1.4301 301 Stainless Steel Strip Cold Rolled Flexible Steel Strips For Flexible Hoses Images
|
